Redarc Oil Pressure & Water Temp 52mm Gauge w/Optional Temp Display - G52-PWT
Ideal for measuring single oil pressure and water temperature, Redarc's Oil Pressure & Water Temperature 52mm Gauge with Optional Temperature Display uses a 120° sweep gauge to indicate between 0 and 80PSI and 30° and 120°C.
Oil pressure monitoring ensures the longevity of a vehicle and ensures correct pressure is maintained so the engine remains well lubricated. When continually travelling at high speeds and towing heavy loads, this is crucial as low oil pressure can be an indicator of low oil levels, diluted or warn-out oil, worn engine bearings, high oil temperature or a warn oil pump.
Redarc's Oil Pressure & Water Temperature Gauge with Optional Temperature Display also supports one of four optional temperature sensors. To utilise one of these functions, an additional temperature sensor will need to be purchased.
GS-UT-80: Used for measuring cabin, fridge or outside temperature and featuring a NTC temperature sensor in a plastic housing. Measuring a range of -20 to 80°C, this sensor is supplied with a 6 metre extension cable.
GS-UT-120: A NTC temperature sensor featuring a metal copper housing with a 6mm diameter mounting hole. Measuring a range of -20 to 120°C, this sensor is supplied with a 6 metre extension cable.
GS-OWT1-4: 1/4 NPT threaded water or oil temperature sender. Designed to measure from -20 to 170°C and supplied with a 3 metre extension cable.
GS-OWT1-8: 1/8 NPT threaded water or oil temperature sender. Designed to measure from -20 to 170°C and supplied with a 3 metre extension cable.
The Redarc 24 to 12V adaptor (GA-2412V) can be used to connect this gauge to a vehicle with a 24V ignition and lighting supply though it will only monitor a 12V battery.
- Satin chrome bezel
- 13 programmable backlight colours
- Multiple programmable alert levels with amber or red backlight and audible beep
- Display illuminates when park lights are on to check oil pressure and water temperature without switching ignition on
- If using more than one Redarc gauge a communications link can be connected between the gauges
- to change the backlight colour of multiple at once.
|Sensor(s) (included):||GS-P-150, GS-OWT1-8|
|Sensor(s) (optional):||GS-UT-80 / GS-UT-120 / GS-OWT1-4 / GS-OWT1-8|
|Standby current draw:||30mA|
|Input (operating) voltage:||6-16V|